Watches TAG Heuer

Aquaracer Diamond Dial, 300 m, 32 mm, 10 diamonds (0.1 Ct)/42 diamonds (0.57 Ct), Polished Steel/Gold (18 Ct) 10 diamonds (0.10 ct)
around the mother-of-pearl dial
In its jewelry models, TAG Heuer pays great attention to the criteria that make a diamond unique: its size, color,clarity and weight. Each stone is verified by gemologists before being set by hand using binoculars in strict accordance with professional standards. The setter first ensures that the diamonds are all identical in size and certifies that the table (the upper face of the stone) is parallel to the base. These principles are essential to the beauty and the quality of the setting and enable another inspection of the stones. The diamonds are then positioned in the claws machined into the steel or gold,and fixed onto the watch. TAG Heuer jewelry models all undergo rigorous quality testing. They are immersed in soapy water and subjected to ultrasound waves to ensure that the diamonds will not become accidentally detached.
42 diamonds (0.57 ct)
set in bezel
In its jewelry models, TAG Heuer pays great attention to the criteria that make a diamond unique: its size, color, clarity and weight. Each stone is verified by gemologists before being set by hand using binoculars in strict accordance with professional standards. The setter first ensures that the diamonds are all identical in size and certifies that the table (the upper face of the stone) is parallel to the base. These principles are essential to the beauty and the quality of the setting and enable another inspection of the stones. The diamonds are then positioned in the claws machined into the steel or gold, and fixed onto the watch. TAG Heuer jewelry models all undergo rigorous quality testing. They are immersed in soapy water and subjected to ultrasound waves to ensure that the diamonds will not become accidentally detached.
Date window at 3
Double security clasp bracelet.
With easy to use push buttons
Fine-brushed/polished steel case with a diameter of 32 mm
Luminescent hands and indexes
are hand-applied and provide excellent visibility in the dark or underwater.
Oversize screw in crown with double gaskets
Easy-to-hold and ensuring water-resistance to 300 m
Scratch resistant sapphire crystal
for excellent durability
All our watches are fitted with sapphire crystal. This is cut from a polished slice of solid sapphire that has been created by the fusion and crystallization of alumina. Sapphire is so hard that only a diamond can scratch it.
Six large studs on bezel
allow for easy manipulation with diving gloves
Unidirectional turning bezel
measures time limits and is an essential safety feature. Any accidental movement of the bezel can only reduce the indicated remaining time.
Water resistant to 300m: a proof of ultimate resistance
ensured by rigorous manufacturing standards and strict testing.

To maintain the esthetic appeal of your watch and keep it in good working order, you should clean it regularly as follows:

First make sure the crown is fully screwed down.
If the seals in your TAG Heuer watch have been changed and tested at an authorised TAG Heuer service centre within the last 12 months, then you can use a soft brush with slightly soapy water to clean the case and bracelet, then rinse it with clear water and dry it with a soft cloth. If your watch is fitted with a strap made from fabric, leather, alligator or python skin, take care not to get it wet
If you have any doubts about the water-resistance of your watch, simply clean it with a soft brush then dry it.
Avoid contact with chemical products (solvents, detergents, cosmetics, etc.) They may damage the bracelet and the water-resistance gaskets.

If the temperature changes suddenly, a slight amount condensation may appear under the crystal of your watch. This mist will disappear by itself and will not affect the functioning of the watch. If the condensation persists, please see your official TAG Heuer dealer.

Water resistance is not a permanent condition. The rubber seals that are designed to ensure against water entry, are under constant pressure and given time will deteriorate.
For this important reason we recommend that a watch should be checked annually to ensure that the seals remain intact.
This thorough and extensive testing includes pressure tests and bench tests and is considered an essential element in the care and maintenance of our watches.

Setup
For all movements

Make sure that your watch is perfectly dry.
Move the crown carefully to make the various changes that are possible.
Avoid changing the date between 8:00 pm and 4.00 am.
Once the changes are made, push the crown back in and (depending on the model) screw it down against the case to preserve its water-resistance.

For mechanical movements
When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (42 – 48 hours depending on the model) is exhausted and the watch stops. To restart it, unscrew the crown if necessary (depending on the model) and wind the movement manually by turning the crown 30- 40 times. This will give it a sufficient power reserve to function normally.
A non-automatic mechanical watch has to be wound every day, winding is complete when you feel the crown resist. Your TAG Heuer is then wound to the maximum. It is important not to force the crown of a hand-wound watch to avoid damaging the mechanism.